开机出现Checking file system on D:The type of the file systm is NTFS.Checking file system on D:The type of the file systm is NTFS.One of your disks needs to be checked for consistency.you may cancel the disk check,but it is strongly recommended t

开机出现Checking file system on D:The type of the file systm is NTFS.Checking file system on D:The type of the file systm is NTFS.One of your disks needs to be checked for consistency.you may cancel the disk check,but it is strongly recommended t
开机出现Checking file system on D:The type of the file systm is NTFS.
Checking file system on D:The type of the file systm is NTFS.One of your disks needs to be checked for consistency.you may cancel the disk check,but it is strongly recommended that you continue.To skip disk checking,press any key within 5 second(s).
然后最后一句话变成了：Disk checking has been cancelled.每次开机都出现这种情况,这是怎么回事啊?谁能告诉我怎么把这个东西给弄掉,

开机出现Checking file system on D:The type of the file systm is NTFS.Checking file system on D:The type of the file systm is NTFS.One of your disks needs to be checked for consistency.you may cancel the disk check,but it is strongly recommended t
1.选择“开始→运行”,在运行对话框中键入“chkntfs /t:0”,即可将磁盘扫描等待时间设置为0；如果要在计算机启动时忽略扫描某个分区,比如C盘,可以输入“chkntfs /x c:”命令；如果要恢复对C盘的扫描,可使用“chkntfs /d c:”命令,即可还原所有chkntfs默认设置,除了自动文件检查的倒计时之外.
2、单击“开始→运行”,在“运行”对话框中输入“regedit”打开注册表编辑器,依次选择“HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager”子键,然后在右侧窗口中找到“BootExecute”键值项并将其数值清空,最后按“F5”键刷新注册表即可.(此法可取消开机时系统对所有磁盘的扫描)
注：
C:\\>chkntfs/?
在启动时显示或修改磁盘检查.
CHKNTFS volume [...]
CHKNTFS /D
CHKNTFS /T[:time]\\r\\nCHKNTFS /X volume [...]
CHKNTFS /C volume [...]
volume:指定驱动器(后面跟一个冒号)、装入点或卷名.
/D 将计算机恢复成默认状态,启动时检查所有驱动器,并对有问题的驱动器执行 chkdsk 命令.
/T:time 将 AUTOCHK 初始递减计数时间改成指定的时间量,单位为秒数.如果没有指定时间,则显示当前设置.
/X 排除启动时不作检查的驱动器.上次执行此命令排除的驱动器此时无效.
/C 安排启动时检查驱动器,如果驱动器有问题,运行 chkdsk.
如果没有指定命令选项,CHKNTFS 会显示每一驱动器有问题的位的状态.
从上面可以看出,输入：chkntfs /x c:可以实现非法关机不扫描C盘.
估计d盘有损坏,建议扫描之.