开机自检C盘,显示如下：Cannot open volume for direct access.The type of the file system is NTFS.还有就是C盘无法进碎片整理,每次分析时都会显示“磁盘碎片整理程序检测到Chkdsk计划在卷C上运行,请运行Chkdsk

开机自检C盘,显示如下：Cannot open volume for direct access.The type of the file system is NTFS.还有就是C盘无法进碎片整理,每次分析时都会显示“磁盘碎片整理程序检测到Chkdsk计划在卷C上运行,请运行Chkdsk
开机自检C盘,显示如下：Cannot open volume for direct access.The type of the file system is NTFS.
还有就是C盘无法进碎片整理,每次分析时都会显示“磁盘碎片整理程序检测到Chkdsk计划在卷C上运行,请运行Chkdsk/f ”,运行后显示“文件系统类型为NTFS,无法锁定当前驱动器,因为另一个过程正在使用这个卷,无法运行Chkdsk,是否计划在下次系统重新启动时检查这个卷?（Y/N）”不管点了Y还是N,下次启动还是这个样子.
如果后面的问题解决不了的话,把上面那个开机自检C盘去掉也行,每回开机慢死了,每次都是两分多钟
请大侠帮帮忙,回答详细还有分,万分感激!

开机自检C盘,显示如下：Cannot open volume for direct access.The type of the file system is NTFS.还有就是C盘无法进碎片整理,每次分析时都会显示“磁盘碎片整理程序检测到Chkdsk计划在卷C上运行,请运行Chkdsk
6d652e63 3f1
Check file system on C:
The type of the file system is NTFS.
Volume label is OS.
The volume is clean.
Cannot open volume for direct access.
Autochk cannot run due to an error caused by a recently installed software package.
Use the system restore feature from the control panel to restore the system to a point prior to the recent software package installation.
Unspecified error occurred (766f6c756d652e63 3f1)
开机总提示要运行chkdsk 结果提示 错误 错误代码766f6c756d652e63 3f1
纠结
搜了好长时间 问微软的倒是不少 解决方法也很多 一阵折腾 终于好了
下面提供解决方法
解决方法1
首先 检查是否安装了 云端 如果是 请卸载
云端貌似存在兼容性问题 在运行磁盘碎片检查的时候 查看不到C盘盘符
chkdsk也找不到C盘
或者 如果不想放弃云端的话 还有以下方法
解决方法2
开机 按住F8 选择修复计算机 命令行模式
输入 set windir查看 系统盘位置
输入 chkdsk 你刚才查到的系统盘符 /r /f
等待修复 然后重启
问题解决
这个问题除了以上提示信息之外 还有 别的提示
比如
checking file system on C:
The type of the file system is NTFS
volume label is win7
one of your disks needs to be checked for consisstency.you
may cancel the disk check.but it is strongly recommended
that you continue.
windows will now check the disk.
cannot open volume for direct access
autochk cannot run dur to an error caused by a recently installed software
package.
use the system restore feature from the control panel to restore the system
recent software package installation.
An unspecified error occurred(766f6c756d652e63 3f1)
解决方法2是来自于微软社区 ID 为 ZhuXu的网友的解决方案
其原文如下
hello,I had the same question yesterday,and I resolved it with a windows7 DVD.
put the disk into the CD/DVD driver,then boot your system from the CD/DVD.when you see the installation interface,follow the steps given below:
1.Click repair your computer,then you will have several items to choose
2.Click command prompt.
3.At the command prompt,type the following command,and then press ENTER:
chkdsk [drive]:/r /f.
i.e.chkdsk F:/r/f press ENTER
the process will take you about 40min.
the drive path is the partion which you have installed the windows system,not C:.in the first step,there is a dialog box and it shows you the location of the windows.i.e.windows(F:)
参考引文地址