ansys中的一个warning,怎么消除.penetrating node is too far below surface single surface interface # = 1 penetrating node # = 699 segment # = 4066 penetration = 0.1636264E-01 remaining distance to shell midsurface = 0.0000000E+00 s,t = 0.192059

ansys中的一个warning,怎么消除.penetrating node is too far below surface single surface interface # = 1 penetrating node # = 699 segment # = 4066 penetration = 0.1636264E-01 remaining distance to shell midsurface = 0.0000000E+00 s,t = 0.192059
ansys中的一个warning,怎么消除.
penetrating node is too far below surface single surface interface # = 1 penetrating node # = 699 segment # = 4066 penetration = 0.1636264E-01 remaining distance to shell midsurface = 0.0000000E+00 s,t = 0.1920596E+00 -0.1000000E+01 penetrated segment nodes:2554 2553 2723 2723

ansys中的一个warning,怎么消除.penetrating node is too far below surface single surface interface # = 1 penetrating node # = 699 segment # = 4066 penetration = 0.1636264E-01 remaining distance to shell midsurface = 0.0000000E+00 s,t = 0.192059
ANSYS这种警告很多,严格的话还是想办法解决掉.这是几何建模有问题,一般忽略没关系,但是会影响精度.可以试着重新几何建模下,或者用其它工具(如solidworks)建模导出x_t格式.比较方便.