Preparation and microwave properties of Ni hollow fiber by electroless plating-template method RefeAbstractNickel-coated silk composites (Ni/silk fiber) were prepared by electroless nickel-plating using a kind of natural silk as template in first sta
来源:学生作业帮助网 编辑:六六作业网 时间:2024/08/31 03:04:19
Preparation and microwave properties of Ni hollow fiber by electroless plating-template method RefeAbstractNickel-coated silk composites (Ni/silk fiber) were prepared by electroless nickel-plating using a kind of natural silk as template in first sta
Preparation and microwave properties of Ni hollow fiber by electroless plating-template method Refe
Abstract
Nickel-coated silk composites (Ni/silk fiber) were prepared by electroless nickel-plating using a kind of natural silk as template in first stage.The silk templates were then removed to get Ni hollow fiber by annealing the Ni/silk fiber at 220 °C for 2 h in air or 700 °C for 1.5 h in nitrogen.The prepared Ni/silk fiber and Ni hollow fiber were characterized by X-ray diffraction (XRD),scanning electron microscope (SEM),field emission scanning electron microscope (FE-SEM) and differential thermal analysis and thermogravimetric analysis (TG-DTA).The values of complex permittivity,complex permeability,dielectric and magnetic loss of Ni/silk fiber and Ni hollow fiber were measured in the frequency range of 2–18 GHz by a reflection/transmission approach using a network analyzer.The results indicate that the dielectric loss of Ni/silk fiber and Ni hollow fiber is high up to 1 even at 18 GHz while the magnetic loss is low.
Keywords:Metals and alloys; Chemical synthesis; Dielectric response; Magnetisation; Scanning electron microscopy帮忙翻一下
Preparation and microwave properties of Ni hollow fiber by electroless plating-template method RefeAbstractNickel-coated silk composites (Ni/silk fiber) were prepared by electroless nickel-plating using a kind of natural silk as template in first sta
额度应该发动机是液体dhidftiufdkjgsdliysdjoyuweg.o撒谎 会让各地搜狗ioueljfdoyufd警方igiourtiuejfiorujfdsug感觉如何发的话机房带宽韩国今日而uyirjhyr如果一二分很高提尔v过户费待遇很高给回复的话固定价格indfgh
摘要
镀镍丝复合材料(镍/蚕丝纤维),制备了镀镍镀在第一阶段使用模板类的天然蚕丝。丝绸模板拆下来,然后在220退火得到的Ni /丝纤维°,2小时在空气或氮气中700 ? 1.5 ° C间?镍中空纤维。制备的Ni /镍丝纤维和中空纤维用X射线衍射(XRD),扫描电子显微镜(SEM)和场发射扫描电子显微镜(FE - SEM)和差热分析和热重分析(TG - DTA)表征。复介电常数,复磁导率,...
全部展开
摘要
镀镍丝复合材料(镍/蚕丝纤维),制备了镀镍镀在第一阶段使用模板类的天然蚕丝。丝绸模板拆下来,然后在220退火得到的Ni /丝纤维°,2小时在空气或氮气中700 ? 1.5 ° C间?镍中空纤维。制备的Ni /镍丝纤维和中空纤维用X射线衍射(XRD),扫描电子显微镜(SEM)和场发射扫描电子显微镜(FE - SEM)和差热分析和热重分析(TG - DTA)表征。复介电常数,复磁导率,介电常数和磁镍/镍丝纤维和中空纤维损失的价值进行计量之2-18由反射/使用网络分析仪的传输方式GHz的频率范围。结果表明,镍/镍丝纤维和中空纤维介电损耗高,甚至高达1千兆赫,而在18磁损耗低。
关键词:金属与合金的化学合成,介电响应,磁化,扫描电子显微镜
收起