英语翻译FINISH:PAINT ALL EXTERIOR SURFACES.GRIT BLAST PRIOR TO PAINTING.ZINC PHOSPHATE CONVERSION COAT SURFACES TO BE PAINTED IN ACCORDANCE WITH ASTM 739-08.METHOD A.APPLY ONE COAT ZINC RICH PRIMER,GEL TIGER DRYLAC 69/90350.POWDER COAT WITH A SIN
来源:学生作业帮助网 编辑:六六作业网 时间:2024/12/27 12:13:57
英语翻译FINISH:PAINT ALL EXTERIOR SURFACES.GRIT BLAST PRIOR TO PAINTING.ZINC PHOSPHATE CONVERSION COAT SURFACES TO BE PAINTED IN ACCORDANCE WITH ASTM 739-08.METHOD A.APPLY ONE COAT ZINC RICH PRIMER,GEL TIGER DRYLAC 69/90350.POWDER COAT WITH A SIN
英语翻译
FINISH:PAINT ALL EXTERIOR SURFACES.GRIT BLAST PRIOR TO PAINTING.ZINC PHOSPHATE CONVERSION COAT SURFACES TO BE PAINTED IN ACCORDANCE WITH ASTM 739-08.METHOD A.APPLY ONE COAT ZINC RICH PRIMER,GEL TIGER DRYLAC 69/90350.POWDER COAT WITH A SINGLE COAT OF TIGER DRYLAC 38/70035 (PART NUMBER RAL 7035 GRAY) 60-80 MICROMETER (2.5-3.5 MILS) THICK.SEMI-GLOSS FINISH.GLOSS LEVEL OF 60 +/- 5 MEASURED IN ACCORDANCE WITH ASTM D523/60DEG.
别用翻译软件直接翻译,不准
英语翻译FINISH:PAINT ALL EXTERIOR SURFACES.GRIT BLAST PRIOR TO PAINTING.ZINC PHOSPHATE CONVERSION COAT SURFACES TO BE PAINTED IN ACCORDANCE WITH ASTM 739-08.METHOD A.APPLY ONE COAT ZINC RICH PRIMER,GEL TIGER DRYLAC 69/90350.POWDER COAT WITH A SIN
表面处理:油漆所有外表面.喷砂涂装前.依据ASTM739-08涂锌磷酸盐转换涂层表面.
方法A适用于单涂层富锌底漆,凝胶老虎DRYLAC69/90350.粉末涂层的老虎DRYLAC38/7003(部件编号RAL7035灰色),厚60-80微米(2.5-3.5千分之一寸)的厚度.
亚光60 FINISH.GLOSS水平+/ - 5测定按照与ASTM D523/60DEG.
大概是这样.很多专业用语不知道翻对没有.
完成所有的外部表面涂料。喷砂喷漆之前。锌磷酸盐转化涂层表面漆成根据用739-08。方法:涂上一层富锌底漆,凝胶老虎的69 /90350。粉末涂层与单一涂层的老虎38 /70035(件拉尔7035灰色)60 - 80微米(2.5 - 3.5密耳)厚。半finish.gloss水平60 + /- 5根据测量向/60deg...
全部展开
完成所有的外部表面涂料。喷砂喷漆之前。锌磷酸盐转化涂层表面漆成根据用739-08。方法:涂上一层富锌底漆,凝胶老虎的69 /90350。粉末涂层与单一涂层的老虎38 /70035(件拉尔7035灰色)60 - 80微米(2.5 - 3.5密耳)厚。半finish.gloss水平60 + /- 5根据测量向/60deg
收起