声卡驱动说明这一段英文是什么意思?Step 1.unzip source codetar xfvj alsa-driver-1.0.xx.tar.bz2Step 2.Complied source codea.cd alsa-driver-1.0.xxb../configure --with-cards=hda-intelc.maked.make installStep 3.reboot your machineStep 4.Use

声卡驱动说明这一段英文是什么意思?Step 1.unzip source codetar xfvj alsa-driver-1.0.xx.tar.bz2Step 2.Complied source codea.cd alsa-driver-1.0.xxb../configure --with-cards=hda-intelc.maked.make installStep 3.reboot your machineStep 4.Use
声卡驱动说明这一段英文是什么意思?
Step 1.unzip source code
tar xfvj alsa-driver-1.0.xx.tar.bz2
Step 2.Complied source code
a.cd alsa-driver-1.0.xx
b../configure --with-cards=hda-intel
c.make
d.make install
Step 3.reboot your machine
Step 4.Use the alsamixer the disable mute (All audio line default is mute)
Must to compile and to install the ALSA library and utility.(Use automatic install is already install)
excute alsamixer
Note:1.The most detail information,can refer the alsa-kernel/Documenttation/ALSA-Configuration.txt in the azx-021705.tar.bz2.
2.Kernel Version must be 2.6 or later.
3.All mixer channels are muted by default.You must use a native
or OSS mixer program to unmute appropriate channels.
4.If can not compile the source code,try to rename the /usr/src/linux-2.x -> /usr/src/linux.
5.The driver added to support the SPDIF functoin.
6.a.You can download the alsa-lib-1.0.x and alsa-utils-1.0.x form the www.alsa-project.org,then unzip and install them.
b.Suggest use "alsamixer" to control mixer function.
c.Used "alsaconf" can autodetect which drive you need to install (step 4).

声卡驱动说明这一段英文是什么意思?Step 1.unzip source codetar xfvj alsa-driver-1.0.xx.tar.bz2Step 2.Complied source codea.cd alsa-driver-1.0.xxb../configure --with-cards=hda-intelc.maked.make installStep 3.reboot your machineStep 4.Use
步骤1:解压缩源码
tar xfvj 高级Linux声音架构(Advanced Linux Sound Architecture)-驱动 1.0.xx.tar.bz2
步骤2:
a.读取光碟中高级Linux声音架构-1.0 xx驱动
b..声卡配置--inter 高保真音频(High Definition Audio-inter )
c.创建
d.创建安装
步骤3:重启您的机器
步骤4.
使用音频混音器,终止静音 (所有音频设备默认设置静音)
必须编译和安装高级Linux声音架构库和程序 (使用自动安装已执行安装)
执行音频混音器
Note:注意:
1.详细细节可以查阅位于azx-021705.tar.bz2有关高级Linux声音架构内核/程序说明书/ 高级Linux声音架构配置文本文档.
2.内核版本必须为2.6或者更新版
3.所有混音器通道均被默认设置为静音,你必须使用本地的或者一个unix平台上一个统一的音频接口(Open Sound System )混音器程序打开音频通道.
4.如无法读取源码,尝试重命名/usr/src/linux-2.x 文件为 /usr/src/linux.
5.驱动增加支持索尼-飞利浦数字界面格式(Sony-Philips Digital Interface Format,)功能.
6.a.你可以访问www.alsa-project.org网页并下载alsa-lib-1.0.x 和 alsa-utils-1.0.x 文件,解压并安装它们.
b.建议使用 "高级Linux声音架构混音器" 管理混音功能.
c.使用"高级Linux声音架构配置文件"(alsaconf) 可以自动检测你需要安装何种驱动 (步骤 4).
楼主,这个有些专业,我尝试翻译了下,应该是计算机安装声卡驱动的说明和界面吧.