英语翻译优点1.利用液压顶顶、顶地的方式解决了定位不牢的问题,而且定位快、只需10秒钟左右就可以垂直平整固定.优点2.利用两根支子与传统打点结合解决了激光定位慢、定位难、误差大

英语翻译优点1.利用液压顶顶、顶地的方式解决了定位不牢的问题,而且定位快、只需10秒钟左右就可以垂直平整固定.优点2.利用两根支子与传统打点结合解决了激光定位慢、定位难、误差大
英语翻译
优点1.利用液压顶顶、顶地的方式解决了定位不牢的问题,而且定位快、只需10秒钟左右就可以垂直平整固定.优点2.利用两根支子与传统打点结合解决了激光定位慢、定位难、误差大的问题.优点3.利用输送带向前向上输送灰的方式与可以改变角度的大抹板结合,完全抹到顶,一毫米也不留.优点4.利用振动器加大抹板解决了人工抹墙容易出现空鼓、裂痕的问题,在吸水的墙面最大抹灰厚度可达3厘米,最小抹灰厚度0.3厘米.优点5.利用可以改变角度的抹板,解决了机器不能顺原路下降压光的问题.优点6.利用拔插杆更方便你不同高度的自由对接,也解决了伸缩杆无法 穿越施工洞的问题,而且机器到工地上,插上立杆就可以用,无需组装.拔下立杆就可以运输,无需拆卸.优点7.机器作业面80厘米宽,一面墙这样80、80抹过去剩下20、30、50厘米宽的,你只需填一侧,无需调整、封挡.因为长时间在沙灰里面,任何的调整、封挡都是不可能的.优点8.机器的输送带可以单停,比如过了施工洞再送灰,就可以抹施工洞以上.优点9.用配套限位卡箍、卡到与过梁同等高度就可以抹过梁以下.相同、用双手按住改变抹板角度的两根撅杆至窗口下方,就可以抹窗口以下.优点10.抹板设计的比机身宽,所以阴角、阳角都很容易做到位.

英语翻译优点1.利用液压顶顶、顶地的方式解决了定位不牢的问题,而且定位快、只需10秒钟左右就可以垂直平整固定.优点2.利用两根支子与传统打点结合解决了激光定位慢、定位难、误差大
Advantages 1.Use vertex at the top of the hydraulic,resolves the position is not firm problem,and positioning fast,only 10 seconds or so and vertical level can be fixed.Advantages 2.Use two root ZhiZi and traditional rbis combined with the laser positioning slow,solve the difficult,positioning of the problem of the great error.Advantages 3.Use the ashes of the conveyor belt upward transportation way forward and can change the perspective of big wipe board union,completely put reach the summit,not a mm.Advantages 4.Use vibrators on board to solve the increasing artificial wall with easy to appear empty drum,crack,issues in the metope of external thermal insulation thickness largest water up to 3 cm,the minimum thickness of plastering 0.3 cm.Advantages 5.Use can change the perspective of on board,the machine can't solve along the way the problem of pressure drop light.Advantages 6.Use in more convenient you pull rod of different height free docking,and solved the adjustable stem not through construction of the hole,and the machine to the site,insert made stem can use,without assembly.Pulling out made stem can transport,do not need to remove.Advantages 7.Machine operation 80 cm wide,the one side wall that 80,80 on the past 20,30,50 left centimeters wide,you only need to fill out a side,no adjustment,sealing block.Because of long time in sand ash inside,any adjustments,sealing block all is impossible.Advantages 8.Machine of belt can single stop,such as the construction hole and then sent ash,can wipe construction hole above.Advantages 9.With matching limit card hoop,card to and lintel coequal height can wipe lintel below.The same,with both hands hold on board the Angle change two root jue stem to below the window,can wipe window below.Advantage 10.Wipe the board design than the wide,so Yin Angle,Yang angles are all very easy to do a

Advantages 1. Use vertex at the top of the hydraulic, resolves the position is not firm problem, and positioning fast, only 10 seconds or so and vertical level can be fixed. Advantages 2. Use two root...

全部展开

Advantages 1. Use vertex at the top of the hydraulic, resolves the position is not firm problem, and positioning fast, only 10 seconds or so and vertical level can be fixed. Advantages 2. Use two root ZhiZi and traditional rbis combined with the laser positioning slow, solve the difficult, positioning of the problem of the great error. Advantages 3. Use the ashes of the conveyor belt upward transportation way forward and can change the perspective of big wipe board union, completely put reach the summit, not a mm. Advantages 4. Use vibrators on board to solve the increasing artificial wall with easy to appear empty drum, crack, issues in the metope of external thermal insulation thickness largest water up to 3 cm, the minimum thickness of plastering 0.3 cm. Advantages 5. Use can change the perspective of on board, the machine can't solve along the way the problem of pressure drop light. Advantages 6. Use in more convenient you pull rod of different height free docking, and solved the adjustable stem not through construction of the hole, and the machine to the site, insert made stem can use, without assembly. Pulling out made stem can transport, do not need to remove. Advantages 7. Machine operation 80 cm wide, the one side wall that 80, 80 on the past 20, 30, 50 left centimeters wide, you only need to fill out a side, no adjustment, sealing block. Because of long time in sand ash inside, any adjustments, sealing block all is impossible. Advantages 8. Machine of belt can single stop, such as the construction hole and then sent ash, can wipe construction hole above. Advantages 9. With matching limit card hoop, card to and lintel coequal height can wipe lintel below. The same, with both hands hold on board the Angle change two root jue stem to below the window, can wipe window below. Advantage 10. Wipe the board design than the wide, so Yin Angle, Yang angles are all very easy to do a

收起