英语翻译A section of tube approximately 100 mm in length shall be split longitudinally,90° on each side of the weld,and the sample opened and flattened with the weld at the point of maximum bend.
来源:学生作业帮助网 编辑:六六作业网 时间:2024/11/08 23:00:06
英语翻译A section of tube approximately 100 mm in length shall be split longitudinally,90° on each side of the weld,and the sample opened and flattened with the weld at the point of maximum bend.
英语翻译
A section of tube approximately 100 mm in length shall be split longitudinally,90° on each side of the weld,and the sample opened and flattened with the weld at the point of maximum bend.
英语翻译A section of tube approximately 100 mm in length shall be split longitudinally,90° on each side of the weld,and the sample opened and flattened with the weld at the point of maximum bend.
把管子纵向劈开约100毫米长度,用火(焊枪)加热后,将劈开的两半各向外弯90度,然后,用火在弯角处加热后展开,凿平,
一段每个焊接端90°纵向两侧的打开,最大弯曲处焊接点磨平的,100mm 的样品管。
将一端长度大约100mm的管纵向劈开,与焊道每边成90°,在最大折弯点用焊接方法割开并整平
一段管长度大约100毫米应当在90°,分裂的纵向焊缝两侧的打开,与样品被夷为平地的点与焊接时的最大弯曲。