英语翻译1.图面C1.5*0.5 应改为C3.0*0.5 ------做到实物与图面相符.(2D 与3D 一致).2.图面2.2 +/-0.13 修改为2.2 +/-0.2-----做到实物同图面相符.( 因打扁位厚度0.8 MM 如做到中线,2.2MM路尺寸会超出下限,因无
来源：学生作业帮助网 编辑：六六作业网 时间：2024/12/18 18:21:01
英语翻译1.图面C1.5*0.5 应改为C3.0*0.5 ------做到实物与图面相符.(2D 与3D 一致).2.图面2.2 +/-0.13 修改为2.2 +/-0.2-----做到实物同图面相符.( 因打扁位厚度0.8 MM 如做到中线,2.2MM路尺寸会超出下限,因无
英语翻译
1.图面C1.5*0.5 应改为C3.0*0.5 ------做到实物与图面相符.(2D 与3D 一致).2.图面2.2 +/-0.13 修改为2.2 +/-0.2-----做到实物同图面相符.( 因打扁位厚度0.8 MM 如做到中线,2.2MM路尺寸会超出下限,因无影响,建议放大公差).
英语翻译1.图面C1.5*0.5 应改为C3.0*0.5 ------做到实物与图面相符.(2D 与3D 一致).2.图面2.2 +/-0.13 修改为2.2 +/-0.2-----做到实物同图面相符.( 因打扁位厚度0.8 MM 如做到中线,2.2MM路尺寸会超出下限,因无
C1.5.The print should be changed to C3.0 * 0.5 * 0.5 -- -- -- -- -- - physical and consistent surface.(2 d and 3 d).2.The surface modification of 2.2 + / - 2.2 to 0.13 + / - 0.2 - do the material object is consistent with the drawings.(due to a thickness of 0.8 MM battered as do the midline,2.2 MM size would be beyond the limit,because of no effect,suggest enlarge tolerance).
Figure 1 C1.5*0.5 should be changed to C3.0*0.5, do the real and the drawing line. (2D is consistent with the 3D.2. 2.2 +/-0.13) surface modification is 2.2 +/-0.2----- do real with surface consistent...
全部展开
Figure 1 C1.5*0.5 should be changed to C3.0*0.5, do the real and the drawing line. (2D is consistent with the 3D.2. 2.2 +/-0.13) surface modification is 2.2 +/-0.2----- do real with surface consistent. (due to the flat position and thickness of 0.8 MM as do midline, 2.2MM will exceed the limit size, due to no effect, suggest that amplification tolerance).
收起