英语翻译电源避雷器设计及测试摘要随着电子技术的快速发展,集成电路对电压和电流脉冲的敏感程度越来越高,除直击雷影响外,雷电流流经室内金属物引起的感应雷成为电子设备损坏和工作
来源:学生作业帮助网 编辑:六六作业网 时间:2024/12/23 11:09:33
英语翻译电源避雷器设计及测试摘要随着电子技术的快速发展,集成电路对电压和电流脉冲的敏感程度越来越高,除直击雷影响外,雷电流流经室内金属物引起的感应雷成为电子设备损坏和工作
英语翻译
电源避雷器设计及测试
摘要
随着电子技术的快速发展,集成电路对电压和电流脉冲的敏感程度越来越高,除直击雷影响外,雷电流流经室内金属物引起的感应雷成为电子设备损坏和工作中断新的主要因素.而避雷器对这种感应雷的保护很有效,因此避雷器在现代雷电防护中被广泛应用.
避雷器分为电源避雷器和信号避雷器,本研究就是设计电源避雷器及其测试.根据氧化锌电阻的压敏特性,把电源避雷器并联到保护电路的相线上,并且与PE线相连.当有雷电流或者过电压达到氧化锌电阻的阀值时,氧化锌电阻迅速导通,将雷电流泄放到大地,从而对电路起到保护作用.为了随时知道SPD是否正常工作,本设计专门提供了温度与通断状态的检测接口.
关键词:电源避雷器;温度测试;遥信测试.
英语翻译电源避雷器设计及测试摘要随着电子技术的快速发展,集成电路对电压和电流脉冲的敏感程度越来越高,除直击雷影响外,雷电流流经室内金属物引起的感应雷成为电子设备损坏和工作
《Design and Test on Power Source Arresters》
Abstract
With the rapid development of electronic technology, the sensitivity of integrated circuits influenced by voltage and current pulse is getting higher and higher, apart from the influence of the direct stroke, the induction stroke caused by the lightning current flowing through the indoor metals becomes the new major factor which damages the electronic equipments and disrupts our works. However, the protection of a arrester is quite effective to the induction stroke, so that the arresters have been widely used in modern lightning protection.
The arrestor can be divided into two types of power source arrester and signal arrester. This paper is researching on the design and test for a power source arrester. Based on the voltage-sensitive characteristic of zinc oxide resistor, we parallel the power source arresters with the protection phrase line, and connect it to the PE lines. When a lightning current or over-voltage reaches the threshold value of the zinc oxide resistor, the resistance of the zinc oxide quickly breakover and bleed the lightning current to the earth, thus protecting the circuit. in order to know whether the SPD is in work any time, this paper also provides a design of the interface detecting the status of the temperature and the on-off state.
Key words: power source arresters; temperature test; remote signal test.
direct stroke 直击雷
induction stroke 感应雷
“遥信”如果是遥控信号就是remote signal ,如果是遥感信号就是remote sensing signal
With the rapid development of electronic technology, integrated circuits for voltage and current sensitivity of the pulse is getting higher and higher, with the exception of the impact of lightning
全部展开
With the rapid development of electronic technology, integrated circuits for voltage and current sensitivity of the pulse is getting higher and higher, with the exception of the impact of lightning
, the lightning current flows through the interior of the sensor caused by metal mine as a work of electronic equipment damage and disruption of a new major factor. The arrester of this sensor is very effective protection of mine, so in the modern lightning protection surge arresters have been widely used.
Into power arrester lightning arrester lightning arrester and signal, the power of this study is to design and test arrester. Based on zinc oxide varistor resistance characteristics, the power surge arresters to protect the circuit in parallel with the line, and lines connected with the PE. When a lightning current or over-voltage to reach the threshold resistance of zinc oxide, the zinc oxide conduction resistance quickly, stemming the flow of the lightning on the earth, thus protecting the circuit. SPD in order to know whether at any time to work, provided the design expertise with the on-off state of the temperature detection interface.
电源避雷器:Power Arrester 温度测试:Temperature Test 遥信测试:Remote test
我这是纯人类翻译的,要是好的话加分哟!!!
收起
Power lightning arrester design and test
the
Along with the rapid development of electronic technology, integrated circuit of voltage and current pulse sensitive degree of more and more high, ...
全部展开
Power lightning arrester design and test
the
Along with the rapid development of electronic technology, integrated circuit of voltage and current pulse sensitive degree of more and more high, in addition to the direct impact, lightning current flows through the induction lightning caused by indoor metal electronic equipment damage and work as a new factor. Interrupt And to this induction lightning arrestor protection is effective, so arrester in modern lightning protection is widely used.
Lightning arrester and signal into power, this study is the design of lightning arrester and test power. According to the characteristics of zno resistance and pressure-sensitive adhesive power lightning protection circuit in parallel to the line, and PE. When lightning overvoltage zno resistance to flow or the threshold, zinc oxide resistance, and the rapid flow on the earth will lightning protection of circuit, thereby. In order to know whether the SPD at work, the normal temperature and design provides the hige state detection interface.
收起
题目翻译如下
Arrester designs and tests a power source。
第一段翻译如下
With electron technology develop rapidly,the sensitive IC degree to voltage and electric current pulse is more and more high , thu...
全部展开
题目翻译如下
Arrester designs and tests a power source。
第一段翻译如下
With electron technology develop rapidly,the sensitive IC degree to voltage and electric current pulse is more and more high , thunder and lightning flows to flow throught induced thunder that the interior metal thing arouses becoming the electronic equipment breakdown and the new major factor of job be interrupted except striking thunder effect straightly. Arrester is effective against this induced the thunder protection but , arrester is hit by therefore in modern thunder and lightning protection by extensive use.
第二段翻译如下
Arrester is power source arrester and signal arrester mark , studying originally is the arrester designing a power source and their testing right away. According to resistant pressure-sensitive zinc oxide characteristic property,on the appearance line power source arrester parallel connection is arrived at protecting a circuit, and, the line links up with PE. Should have thunder and lightning when the stream or overtension reaches resistant zinc oxide valve value, zinc oxide electric resistance is prompt lead , the thunder and lightning stream is leaked readjusting oneself to a certain extent to the earth , is play arrive at protection role to the circuit thereby. Work for knowing SPD is regular or not at any time, this the interface designing that the speciality has provided the temperature and exchanged the detecting cutting off state.
好像已经给你翻译过了、、
标准人工翻译、、希望可以帮助你、、
收起
Power supply design and testing of surge arresters
With the rapid development of electronic technology, integrated circuits for voltage and current sensitivity of the pulse is getting higher and h...
全部展开
Power supply design and testing of surge arresters
With the rapid development of electronic technology, integrated circuits for voltage and current sensitivity of the pulse is getting higher and higher, with the exception of the impact of, the lightning current flows through the interior of the sensor caused by metal mine as a work of electronic equipment damage and disruption of a new major factor. The arrester of this sensor is very effective protection of mine, so in the modern lightning protection surge arresters have been widely used.
Into power arrester lightning arrester lightning arrester and signal, the power of this study is to design and test arrester. Based on zinc oxide varistor resistance characteristics, the power surge arresters to protect the circuit in parallel with the line, and lines connected with the PE. When a lightning current or over-voltage to reach the threshold resistance of zinc oxide, the zinc oxide conduction resistance quickly, stemming the flow of the lightning on the earth, thus protecting the circuit. SPD in order to know whether at any time to work, provided the design expertise with the on-off state of the temperature detection interface.
收起
Power Lightning Arrester's Design and Test
Abstract:
Along with the rapid development of electronic technology, integrated circuit of voltage and current pulse sensitive degree of more and mo...
全部展开
Power Lightning Arrester's Design and Test
Abstract:
Along with the rapid development of electronic technology, integrated circuit of voltage and current pulse sensitive degree of more and more high, in addition to the direct impact, lightning current flows through the induction lightning caused by indoor metal electronic equipment damage and work as a new factor. Interrupt And to this induction lightning arrestor protection is effective, so arrester in modern lightning protection is widely used.
Lightning arrester and signal into power, this study is the design of lightning arrester and test power. According to the characteristics of zno resistance and pressure-sensitive adhesive power lightning protection circuit in parallel to the line, and PE. When lightning overvoltage zno resistance to flow or the threshold, zinc oxide resistance, and the rapid flow on the earth will lightning protection of circuit, thereby. In order to know whether the SPD at work, the normal temperature and design provides the hige state detection interface.
Keywords:
power lightning arrester, Temperature testing, Remote communication test.
收起
With the rapid development of electronic technology, integrated circuits for voltage and current sensitivity of the pulse is getting higher and higher, with the exception of the impact of, the lightni...
全部展开
With the rapid development of electronic technology, integrated circuits for voltage and current sensitivity of the pulse is getting higher and higher, with the exception of the impact of, the lightning current flows through the interior of the sensor caused by metal mine as a work of electronic equipment damage and disruption of a new major factor. The arrester of this sensor is very effective protection of mine, so in the modern lightning protection surge arresters have been widely used.
Into power arrester lightning arrester lightning arrester and signal, the power of this study is to design and test arrester. Based on zinc oxide varistor resistance characteristics, the power surge arresters to protect the circuit in parallel with the line, and lines connected with the PE. When a lightning current or over-voltage to reach the threshold resistance of zinc oxide, the zinc oxide conduction resistance quickly, stemming the flow of the lightning on the earth, thus protecting the circuit. SPD in order to know whether at any time to work, provided the design expertise with the on-off state of the temperature detection interface.
收起
用!!这是一篇建筑设计发表的解说稿,请翻译成英文,简单。通顺。用词恰当就行
With electron technology develop rapidly,the sensitive IC degree to voltage and electric current pulse is more and more high , induced thunder that the thing arouses except that straight strike thunde...
全部展开
With electron technology develop rapidly,the sensitive IC degree to voltage and electric current pulse is more and more high , induced thunder that the thing arouses except that straight strike thunder affecting the outside , the thunder and lightning stream flowing throught interior metal becomes the electronic equipment breakdown and the new major factor of job be interrupted. Arrester is effective against this induced the thunder protection but , arrester is hit by therefore in modern thunder and lightning protection by extensive use. Arrester is power source arrester and signal arrester mark , studying originally is the arrester designing a power source and their testing right away. According to resistant pressure-sensitive zinc oxide characteristic property,on the appearance line power source arrester parallel connection is arrived at protecting a circuit, and, the line links up with PE. Should have thunder and lightning when the stream or overtension reaches resistant zinc oxide valve value, zinc oxide electric resistance is prompt lead , the thunder and lightning stream is leaked readjusting oneself to a certain extent to the earth , is play arrive at protection role to the circuit thereby. Work for knowing SPD is regular or not at any time, this the interface designing that the speciality has provided the temperature and exchanged the detecting cutting off state.
Keywords: Power source arrester; The temperature tests; The distant message tests.
收起
The power source arrester designs and tests
abstract along with the electronic technology fast development, the integrated circuit is getting higher and higher to the voltage and the current puls...
全部展开
The power source arrester designs and tests
abstract along with the electronic technology fast development, the integrated circuit is getting higher and higher to the voltage and the current pulse sensitive degree, besides the long jab thunder influence, the thunder electric current flows through the induction thunder which the indoor metal causes to become the electronic installation damage and the discontinuation of work new primary factor. But the arrester is very effective to this kind of induction thunder's protection, therefore the arrester is widely applied in the modern thunder and lightning protection. the arrester divides into the power source arrester and the signal arrester, this research is designs the power source arrester and the test. According to zinc oxide resistance pressure sensitive characteristic, power source arrester parallel to protection circuit's phase line, and the PE line is connected. When has the thunder electric current or the overvoltage achieves the zinc oxide resistance the valve value, the zinc oxide resistance rapid breakover, the thunder electric current draining arrives at the earth, thus plays the protective function to the electric circuit. To momentarily know that the SPD whether normal work, this design has provided the temperature and the make-and-break condition examination connection specially.
key word: Power source arrester; Temperature test; Remote letter test.
收起
With the rapid development of electronic technology, integrated circuits for voltage and current sensitivity of the pulse is getting higher and higher, with the exception of the impact of lightning
全部展开
With the rapid development of electronic technology, integrated circuits for voltage and current sensitivity of the pulse is getting higher and higher, with the exception of the impact of lightning
, the lightning current flows through the interior of the sensor caused by metal mine as a work of electronic equipment damage and disruption of a new major factor. The arrester of this sensor is very effective protection of mine, so in the modern lightning protection surge arresters have been widely used.
Into power arrester lightning arrester lightning arrester and signal, the power of this study is to design and test arrester. Based on zinc oxide varistor resistance characteristics, the power surge arresters to protect the circuit in parallel with the line, and lines connected with the PE. When a lightning current or over-voltage to reach the threshold resistance of zinc oxide, the zinc oxide conduction resistance quickly, stemming the flow of the lightning on the earth, thus protecting the circuit. SPD in order to know whether at any time to work, provided the design expertise with the on-off state of the temperature detection interface.
电源避雷器:Power Arrester 温度测试:Temperature Test 遥信测试:Remote test
收起