有关印刷工艺的英文意思Score cover 1” from left edge for spine; drill holes,trim to size,attach two 1/4” aluminum screws.Screws should be paintedtop and bottom with Dura Coat paint in PMS 5185 or have a brushed chrome finish.Add 1.7 mil

来源:学生作业帮助网 编辑:六六作业网 时间:2024/12/24 21:59:45
有关印刷工艺的英文意思Scorecover1”fromleftedgeforspine;drillholes,trimtosize,attachtwo1/4”aluminumscrews.Screws

有关印刷工艺的英文意思Score cover 1” from left edge for spine; drill holes,trim to size,attach two 1/4” aluminum screws.Screws should be paintedtop and bottom with Dura Coat paint in PMS 5185 or have a brushed chrome finish.Add 1.7 mil
有关印刷工艺的英文意思
Score cover 1” from left edge for spine; drill holes,trim to size,attach two 1/4” aluminum screws.Screws should be painted
top and bottom with Dura Coat paint in PMS 5185 or have a brushed chrome finish.Add 1.7 mil matte lamination to both
front and back covers.The lamination should be flush cut.

有关印刷工艺的英文意思Score cover 1” from left edge for spine; drill holes,trim to size,attach two 1/4” aluminum screws.Screws should be paintedtop and bottom with Dura Coat paint in PMS 5185 or have a brushed chrome finish.Add 1.7 mil
cover 面盖部份左边向入一吋刻一条骨线,钻孔(应该两个),裁剪尺寸,加上两粒1/4”上漆铝螺丝.
上下部份 上Dura Coat PMS 5185漆 或brush chrome (应该是类似银色),在前後面盖加上1.7mil厚度薄膜.薄膜要圆滑包上.

分盖1”从左边缘的脊柱;钻孔,调整大小,将两个1 / 4“铝螺丝。螺钉应paintedtop底硬脑膜漆在PMS 5185或有镀铬。添加1.7 mil锍分层bothfront和封底。层压应冲切。

从左边划一条长为1“的中枢线,钻孔,修剪大小,附上两个1/4”的铝螺丝。螺丝的顶部和底部需要涂上PMS5185的杜拉涂漆,或者经过磨毛的镀铬加工。在前面和背部都加上1.7密耳的锍分层。这个分层应该是切齐。

天啊 那么多