英语翻译设计内容:用Pro/engineer的零件模块建造实体模型;用CAXA电子图版绘制零件的工艺规程表和夹具设计图;用MasterCAM模拟加工和生成数控代码,用CIMCO Edit完成仿真.设计难点:由于零件的
来源:学生作业帮助网 编辑:六六作业网 时间:2024/08/15 06:18:23
英语翻译设计内容:用Pro/engineer的零件模块建造实体模型;用CAXA电子图版绘制零件的工艺规程表和夹具设计图;用MasterCAM模拟加工和生成数控代码,用CIMCO Edit完成仿真.设计难点:由于零件的
英语翻译
设计内容:用Pro/engineer的零件模块建造实体模型;用CAXA电子图版绘制零件的工艺规程表和夹具设计图;用MasterCAM模拟加工和生成数控代码,用CIMCO Edit完成仿真.
设计难点:由于零件的整体结构比较复杂,在实体造型时,零件上、下表面的槽比较难造型.反复利用拉伸、旋转、扫描命令解决了上述问题.在零件的工艺规程设计中,零件下表面粗糙度要求较高,通过精磨可以达到要求.零件中心孔的粗糙度要求也较高,通过磨销即可达到要求.
翻译软件翻译的不要
英语翻译设计内容:用Pro/engineer的零件模块建造实体模型;用CAXA电子图版绘制零件的工艺规程表和夹具设计图;用MasterCAM模拟加工和生成数控代码,用CIMCO Edit完成仿真.设计难点:由于零件的
设计内容:
Content of Design:
用Pro/engineer的零件模块建造实体模型;
Constructing the full-scale model with pro/engineer accessory module
用CAXA电子图版绘制零件的工艺规程表和夹具设计图;
Drawing the accessory's stipulation chart of technic and the clamp's plan with CAXA elctric plate
用MasterCAM模拟加工和生成数控代码,用CIMCO Edit完成仿真.
Stimulating the processing and getting the cod for numerical control with MasterCAN,then using CIMCO Edit to finish the stimulation
设计难点:由于零件的整体结构比较复杂,在实体造型时,零件上、下表面的槽比较难造型.
Diffeculty:Because of the complicated general structure of the accessories,it'll be hard to model the upper surface and the undersurface of the accessoried while construction the full-scale model
反复利用拉伸、旋转、扫描命令解决了上述问题.
Repeated usage of strething ,rolling and scanning order can solve the problems above.
在零件的工艺规程设计中,零件下表面粗糙度要求较高,通过精磨可以达到要求.
In the stimulation design of technic,high roughness is requested for the accessory's undersurface which can be achieved by careful grinding.
零件中心孔的粗糙度要求也较高,通过磨销即可达到要求.
The roughness of the core bore should also be high,it can be realized by grinding too.
http://translate.google.cn/translate_t
什么都能翻译哦
Design elements: Pro / engineer parts of the module construction entity model with CAXA electronic chart mapping the parts of a point of order table and fixture design; analog processing and use Maste...
全部展开
Design elements: Pro / engineer parts of the module construction entity model with CAXA electronic chart mapping the parts of a point of order table and fixture design; analog processing and use MasterCAM generate NC code, complete with CIMCO Edit simulation.
Design and difficult: As part of the overall structure more complicated, in solid modeling, spare parts, under the surface of the tank more difficult to form. Repeated use of stretching, rotating, scanning order to solve the above problem. In parts of the design of a point of order, spare parts under the surface roughness higher by Jingmo can meet the requirement. Parts of the central hole roughness requirements are also higher, grinding through the sale to meet the requirement.
收起