求中文翻译四英文如下：4 EXPERIMENTA uniaxial simulator(Fig.5)and a tyre sensor pad[19](Fig.6)were used in physical experiments on tyrecontact.The contact pressure was detected withnearly 65 000 pressure sensors on this pad,whichhad a sensi
来源：学生作业帮助网 编辑：六六作业网 时间：2024/11/08 23:13:33
求中文翻译四英文如下：4 EXPERIMENTA uniaxial simulator(Fig.5)and a tyre sensor pad[19](Fig.6)were used in physical experiments on tyrecontact.The contact pressure was detected withnearly 65 000 pressure sensors on this pad,whichhad a sensi
求中文翻译四
英文如下：4 EXPERIMENT
A uniaxial simulator(Fig.5)and a tyre sensor pad[19]
(Fig.6)were used in physical experiments on tyre
contact.The contact pressure was detected with
nearly 65 000 pressure sensors on this pad,which
had a sensing area measuring 11.57 in×11.57 in
and a pressure range of 0–1030 kPa,using the data
acquisition computer system in Fig.6.The tyre and
pressure sensor pad were fixed on the uniaxial
simulator,and the weight of 3.9 kN(the upper part
of Fig.5)was taken down slowly.All cables and data
transition cards were set,and the data management
computer program was activated.The pressure
distribution was measured after the up-and-down
motion of the weight had finished.The tyre and
sensor pad contact is shown in Fig.7.
求中文翻译四英文如下：4 EXPERIMENTA uniaxial simulator(Fig.5)and a tyre sensor pad[19](Fig.6)were used in physical experiments on tyrecontact.The contact pressure was detected withnearly 65 000 pressure sensors on this pad,whichhad a sensi
一个单轴的模拟器和一个轮胎垫传感器都是用来测试轮胎接触点的实验的,接触点上轮胎垫的压力被检测出游将近有65000,就如感觉测试一块11.57in乘以11.57in的区域一样,压力从0到1030个千帕斯卡,这个数据来自计算机的6好悬浮式几分陀螺.轮胎和压力轮胎垫都是固定在单轴模拟装置上的,它的重量是3.9千牛开始下降,所有电缆和数据过渡卡都已经安排就位,电脑数据管理系统已经激活,压力分流已经测量,在重量上上下下的移动中已经完成.轮胎和轮胎垫接触点都已显示为7.
（大概的翻译,你就将就的用吧）