焊接英文翻译The techniqui for manual GTA welding filler metal to the weld pool is illustrated in Figure1-10.First the arc is established between the electrode and the work using high frequency arc starting.Touch staring is not recommended.The t
来源：学生作业帮助网 编辑：六六作业网 时间：2024/12/20 04:24:36
焊接英文翻译The techniqui for manual GTA welding filler metal to the weld pool is illustrated in Figure1-10.First the arc is established between the electrode and the work using high frequency arc starting.Touch staring is not recommended.The t
焊接英文翻译
The techniqui for manual GTA welding filler metal to the weld pool is illustrated in Figure1-10.First the arc is established between the electrode and the work using high frequency arc starting.Touch staring is not recommended.The torch is moved in a small circle to establish a pool.Then the torch is tilted back on about a 75°angle and moved back slightly while sufficient filler metal is dipped into the pool.
焊接英文翻译The techniqui for manual GTA welding filler metal to the weld pool is illustrated in Figure1-10.First the arc is established between the electrode and the work using high frequency arc starting.Touch staring is not recommended.The t
多伦多的手工焊接填充金属熔池techniqui在图1所示,10.First弧电极之间和工作使用高频电弧starting.Touch盯着不recommended.The成立火炬在一个小圈子动议建立一个倾斜的火炬在大约75 °角,搬回轻微上升,而充足的钎料是入池浸回pool.Then
图表1-10 中已经阐述了GTA焊丝变成熔池的方法。
首先，用高频率起弧使电极上出现电弧。注意不要用手接触，或用眼睛直视。 火焰以小圆形移动，来形成熔池。
然后，把火焰后仰75°，往回稍微移动，把足够的焊丝放入池中。
GTA没有翻出来~ 不过都是我自己翻的 应该不影响你的理解吧
希望楼主满意！...
全部展开
图表1-10 中已经阐述了GTA焊丝变成熔池的方法。
首先，用高频率起弧使电极上出现电弧。注意不要用手接触，或用眼睛直视。 火焰以小圆形移动，来形成熔池。
然后，把火焰后仰75°，往回稍微移动，把足够的焊丝放入池中。
GTA没有翻出来~ 不过都是我自己翻的 应该不影响你的理解吧
希望楼主满意！
收起