求将下面英文翻译成中文 谢谢Fig. 11 shows the circumferential stress curve vs. radius, due to interference and internal pressure action. A comparable crack propagation behavior for the die and the stress ring can be obtai
来源:学生作业帮助网 编辑:六六作业网 时间:2024/11/23 15:41:37
求将下面英文翻译成中文 谢谢Fig. 11 shows the circumferential stress curve vs. radius, due to interference and internal pressure action. A comparable crack propagation behavior for the die and the stress ring can be obtai
求将下面英文翻译成中文 谢谢
Fig. 11 shows the circumferential stress curve vs. radius, due to interference and internal pressure action. A comparable crack propagation behavior for the die and the stress ring can be obtained fixing that, the circumferential stress has to be the same in the most stressed point, i.e. at the inner
radius for the die and at the interface between the matrix and the stress ring, for the former. Therefore the following relationship between internal pressure, interference pressure and the dimensional factor must be satisfied:
求将下面英文翻译成中文 谢谢Fig. 11 shows the circumferential stress curve vs. radius, due to interference and internal pressure action. A comparable crack propagation behavior for the die and the stress ring can be obtai
图11显示vs.向应力半径曲线,由于干扰和内部的压力的行动.类似的裂纹扩展行为的死的,可以得到的应力环向应力修,必须同样在压力最大的时候点,即在内部的
对模具和半径之间的界面矩阵和应力戒指,因为前者.因此下面的关系、干涉内部压力压力和空间因素必须满足: