电脑开机就显示:This product is covered by one or more of the following patents:US5,307,459,US5,434,872,US5,732,094,US6,570,884,US6,115,776,and US6,327,625 realtek pci express fast ethernet controller series v1.7(090506) pxe-e61:media test fa
来源:学生作业帮助网 编辑:六六作业网 时间:2024/11/09 05:18:38
电脑开机就显示:This product is covered by one or more of the following patents:US5,307,459,US5,434,872,US5,732,094,US6,570,884,US6,115,776,and US6,327,625 realtek pci express fast ethernet controller series v1.7(090506) pxe-e61:media test fa
电脑开机就显示:This product is covered by one or more of the following patents:US5,307,459,US5,434,872,US5,732,094,US6,570,884,US6,115,776,and US6,327,625 realtek pci express fast ethernet controller series v1.7(090506) pxe-e61:media test failure,check cable pxe-mof:exiting pxe rom 一直在循环这些东西就是进不了系统 这个之后你咋解决的?
电脑开机就显示:This product is covered by one or more of the following patents:US5,307,459,US5,434,872,US5,732,094,US6,570,884,US6,115,776,and US6,327,625 realtek pci express fast ethernet controller series v1.7(090506) pxe-e61:media test fa
你怎么设置的BIOS啊,看到REALTEC PCI我就知道原因了,这是由于网卡启用了BOOT ROM芯片的引导功能.
可以在bios里面修改配置:
开机按Del键,进入BIOS->Integrated Peripherals ->Onboard LAN Boot Rom 改为Disabled. (或者可能在其它位置的 onboard lan boot rom 项目设置为disable 即可啦)
其它的解决方法(主要是品牌电脑,有定制选项):
开机进入屏幕有“Press Shift-F10 Configure……”提示画面时有3秒时间停顿,此时快速同时按“Shift+F10”进入网卡设置的蓝色界面,会出现四个操作选项:
第1项:Network Boot Protocol 默认选择:PXE
第2项:Boot order 选择:Rom Disable 即可关闭“DHCP...\”检测
第3项:Show config message 选择:Disable 即可关闭“Shift+F10”提示
第4项:Show Message Time 默认选择:3S
设置好后,按F4保存退出,重启电脑即可.