ANSYS:Both solid model and finite element model boundary conditions have been appliedto this model .As solid loads are transferred to the nodes or element ,they can overwrite directly applied loads.

ANSYS:Both solid model and finite element model boundary conditions have been appliedto this model .As solid loads are transferred to the nodes or element ,they can overwrite directly applied loads. ansys 薄板模态分析 可以用solid单元吗 ANSYS结果出现错误Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly applied loads.这是错误文件的说明,加载 ansys 发出warning,这个对结果有没有很大的影响?Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly applied load ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl solid solid ansys在做静力学分析时,强制退出是怎么回事?我在ansys中几何建模,然后定义材料、划分网格都没问题,定义约束也没问题,但等我施加完载荷时,跳出来一个警告框：“Both solid model and finite element ansys 定义 是什么请问,ansys里的solid ,shell, link 分别定义的是什么在实际操作的时候是如何选取的? ansys ansys ANSYS 在ansys分析中,solid单元都是3个自由度,如果给这个单元增加一个自由度,会有什么影响? 如何在ANSYS中建立一个实体圆柱模型啊,为什么我通过Solid Cylinder中建立出的是一个圆呢,半径25,高50 ANSYS节点耦合node XX is associated with more than one solid model entity这个怎么处理,会影响最后的计算结果吗? ANSYS中分别用beam单元、shell单元、solid单元计算一根简支梁,计算精度有差异,原因是什么?如题 ansys中怎样把combin铰接到solid上小弟在分析一个振动问题,除了选择harmic输入频率外还有其他问题么?小弟愿意加分 solid dyed