英语翻译外球面轴承 产品型号：各种型号 产品信息：外球面轴承技术参数 外球面轴承：(1)带立式座外球面球轴承,(2)带方形座外球面球轴承,(3)带菱形座外球面球轴承,(4)带凸台圆形座外球面

英语翻译外球面轴承 产品型号：各种型号 产品信息：外球面轴承技术参数 外球面轴承：(1)带立式座外球面球轴承,(2)带方形座外球面球轴承,(3)带菱形座外球面球轴承,(4)带凸台圆形座外球面
英语翻译
外球面轴承
产品型号：各种型号
产品信息：
外球面轴承技术参数
外球面轴承：
(1)带立式座外球面球轴承,
(2)带方形座外球面球轴承,
(3)带菱形座外球面球轴承,
(4)带凸台圆形座外球面球轴承,
(5)带环形座外球面球轴承,
(6)带滑块座外球面球轴承,
(7)带悬吊式座外球面球轴承,
(8)带悬挂式座外球面球轴承,
(9)带可调菱形座外球面球轴承,
(10)带冲压座外球面球轴承,
(11)带其他座的外球面球轴承
滚针轴承
产品型号：各种型号
产品信息：
滚针轴承是带圆柱滚子的滚子轴承,相对其直径,滚子既细又长.这种滚子称为滚针.仅管具有较小的截面,轴承仍具有较高的负荷随能力,因此,特别适用于径向空间受限制的场合.
调心球
产品型号：各种型号
产品信息：
调心球轴承产品特征：
调心球轴承有圆柱孔和圆锥孔两种结构,保持架的材质有钢板、合成树脂等.其特点是外圈滚道呈球面形,具有自动调心性,可以补偿不同心度和轴挠度造成的误差,但其内、外圈相对倾斜度不得超过3度.
调心球轴承结构形式：
带防尘盖和带密封圈的深沟球轴承装配时已填入适量的润滑脂,安装前不应加热也不必清洗,使用过程中不需再润滑,适应运行温度－30℃至＋120℃之间.

英语翻译外球面轴承 产品型号：各种型号 产品信息：外球面轴承技术参数 外球面轴承：(1)带立式座外球面球轴承,(2)带方形座外球面球轴承,(3)带菱形座外球面球轴承,(4)带凸台圆形座外球面
Outside spherical surface bearing
Product model: Each kind of model
Product information:
Outside spherical surface bearing technology parameter
Outside spherical surface bearing:
(1) outside belt vertical place spherical surface ball bearing,
(2) outside belt square shape place spherical surface ballbearing,
(3) outside belt diamond place spherical surface ball bearing,
(4) outside belt raised circular place spherical surface ballbearing,
(5) outside belt ring-like place spherical surface ballbearing,
(6) outside belt slide place spherical surface ball bearing,
(7) outside belt suspension type place spherical surface ballbearing,
(8) outside belt hanging place spherical surface ballbearing,
(9) the belt may adjust outside the diamond place thespherical surface ball bearing,
(10) outside belt ramming place spherical surface ballbearing,
(11) belt other places outside spherical surface ballbearings
Needle bearing
Product model: Each kind of model
Product information:
The needle bearing is the belt cylindrical roller roller bearings, therelative its diameter, the roller both thin and is long. This kind ofroller is called the roller pin. Only the pipe fitting had a smallersection, the bearing still has a higher load along with the ability,therefore, specially is suitable for the radial direction space thesituation which limits.
Moves 心球
Product model: Each kind of model
Product information:
Adjusts 心球 the bearing product characteristic:
Adjusts 心球 the bearing to have the column hole and the circularcone hole two kind of structures, a maintenance material quality hasthe steel plate, the synthetic resin and so on. Its characteristic isthe addendum circle roller conveyer assumes the ball face shape, hasthe automatic accent disposition, may compensate the error which themisalignment and the axis 挠度 creates, but among them, the addendumcircle relative gradient does not have to surpass 3.
Adjusts 心球 the bearing structural style:
The belt dust cap and the belt seal packing collar gulley ball bearingassembles when has filled in right amount 润滑脂, before theinstallment should not heat up also does not need to clean, in the useprocess does not have again to lubricate, adaption operatingtemperature - 30 ℃ to + 120 ℃ between.
其中的术语我有没翻译的
请参考,

Spherical Bearings,
Model: various models
Product information:
The technical parameters Spherical Bearings
The spherical bearings:
(1) Vertical Block, with spherical ball bear...

全部展开

Spherical Bearings,
Model: various models
Product information:
The technical parameters Spherical Bearings
The spherical bearings:
(1) Vertical Block, with spherical ball bearings,
(2) with square blocks, spherical ball bearings,
(3) Block rhombus with ball bearings, spherical,
(4) Block with convex circular, spherical ball bearings,
(5) Block with circular, spherical ball bearings,
(6), Block slider with spherical ball bearings,
(7) Block, suspended with spherical ball bearings,
(8) Block, with the hoisting of the spherical ball bearings,
(9) Diamond Block, with adjustable spherical ball bearings,
(10), Block Stamping with spherical ball bearings,
(11), with other blocks of spherical ball bearings
Needle Roller Bearings
Model: various models
Product information:
Needle roller bearings are cylindrical roller with the roller bearing, relative to its diameter, roller both small and long. Needle Roller as such. Only a small section of the, still bearing the load with a higher capacity, it is particularly applicable to the radial space is limited occasions.
- Ball
Model: various models
Product information:
- Aligning ball bearings product characteristics:
- Aligning ball bearings and a cylindrical pore structure of the two conical hole to maintain a steel frame materials, such as synthetic resin. The features of Outer Ring Road Roller were spherical in shape, with automatic Mind, for different heart and axial deflection of the error, but, Outer Ring relative inclination should not exceed three degrees.
- Aligning ball bearings structure:
With Shield and with the deep groove ball bearing ring assembly has been filled adequate grease, heat before installation should also not clean, no longer used in the lubrication process, to operating temperature -30 ° C to +120 ℃.
在告送你个网站，你要在遇到要翻译自己去翻译，很快的一般几秒就翻译了
http://www.google.cn/language_tools

收起

Outside surface of sphere bearings
Product model number: Various model number
Product information:
Outside surface of sphere bearings technique parameter
Outside surface of sphere bea...

全部展开

Outside surface of sphere bearings
Product model number: Various model number
Product information:
Outside surface of sphere bearings technique parameter
Outside surface of sphere bearings:
(1)Take a sign type outside surface of sphere ball bearings,
(2)Take square outside surface of sphere ball bearings,
(3)Take rhombus outside surface of sphere ball bearings,
(4)Take convex set circular outside surface of sphere ball bearings,
(5)Take a wreath form outside surface of sphere ball bearings,
(6)Take a slippery piece outside surface of sphere ball bearings,
(7)Take to hang a mourn type outside surface of sphere ball bearings,
(8)Take a hang type outside surface of sphere ball bearings,
(9)Take an adjustable rhombus outside surface of sphere ball bearings,
(10)Take to hurtle to press an outside surface of sphere ball bearings,
(11)Take the outside surface of sphere ball bearings of other
Roll needle bearings
Product model number: Various model number
Product information:
Rolling the needle bearings takes a cylinder to roll son to roll sub- bearings, opposite its diameter, roll son thin and long.This kind of rolls son to be called to roll needle.The only tube has to cut noodles more and smallly, the bearings still has higher burden with the ability, being applicable to path toward space to be subjected to limiting situation therefore and specially.
Adjust heart ball
Product model number: Various model number
Product information:
Adjust a heart ball bearings product characteristic:
Adjust heart ball bearings to have cylinder bore and cone bore two kinds of structure, the material which keeps contain steel plate, synthetic resin...etc..Its characteristics is the outside turn rolls a way to present a surface of sphere form, having an au to adjust disposition, can compensate the error margin for resulting in of different heart degree and stalk rao degree, but it inside, outside turn opposite inclination degree can not more than 3 degrees.
Adjust a heart ball bearings structure form:
The deep ditch ball taken a dust palliative cover and taken to seal completely a turn the bearings assemble have already stuffed with just the right amount of lubrication fat, shouldn't heat to need not clean, either before installing, use in the process don't need again lubricate, adapt movement temperature － 30 ℃ go to+of 120 ℃ .

收起