Checking file system on I:The type of the file system is FAT32.One of your disks needs to be checChecking file system on I:The type of the file system is FAT32.One of your disks needs to be checked for consistency.Youmay cancel the disk check,but it

Checking file system on I:The type of the file system is FAT32.One of your disks needs to be checChecking file system on I:The type of the file system is FAT32.One of your disks needs to be checked for consistency.Youmay cancel the disk check,but it
Checking file system on I:The type of the file system is FAT32.One of your disks needs to be chec
Checking file system on I:
The type of the file system is FAT32.
One of your disks needs to be checked for consistency.You
may cancel the disk check,but it is strongly recommended
that you continue.
Windows will now check the disk.
Volume Serial Number is 30F0-0E3D
The \QP@槾"L\x1d entry contains a nonvalid link.
Convert lost chains to files (Y/N)?Yes
1003520 bytes in 1 recovered files.
Windows has made corrections to the file system.
2011123712 bytes total disk space.
8192 bytes in 2 hidden files.
12288 bytes in 2 folders.
573947904 bytes in 203 files.
1437147136 bytes available on disk.
4096 bytes in each allocation unit.
490997 total allocation units on disk.
350866 allocation units available on disk.
我SONY相机上2G的记忆棒插入读卡器,里面就一个这个文本文档.打开里面就写这些.怎么回事?我用两个读卡器都试了都一样这样显示.
我在相机里面可以直接看啊,为什么读卡器什么都没有?

Checking file system on I:The type of the file system is FAT32.One of your disks needs to be checChecking file system on I:The type of the file system is FAT32.One of your disks needs to be checked for consistency.Youmay cancel the disk check,but it
开机出现这种情况一般是非正常关机造成的,这是硬盘自检,属于正常现象,只不过比较耽误时间,如果你觉得烦是可以取消的.Windows在不正常关机的情况下(如:突然断电等),就会在下次启动电脑时进行磁盘扫描.可是往往等它完成扫描后,再一次启动电脑时它还是“阴魂不散”的继续扫描.我就遇到过这种情况,所以就总结了以下几条经验,希望能给大家一些参考.
英文翻译成中文：
检查C盘的文件系统 ：
该文件系统的类型是FAT .
您的其中一个磁盘需要检查一致性.您
可以取消磁盘检查,但强烈建议您继续.
Windows将现在检查磁盘.
卷序列号是007B - C945
Windows已检查文件系统并没有发现任何问题.
2006646784字节总磁盘空间.
196.608万字节7隐藏文件.
6324224字节188个文件夹.
1784610816字节7124文件.
213745664字节在磁盘上可用.
在每个分配单元里有32768字节.
磁盘上总共有61238个分配单元.
6523个分配单元在磁盘上可用.
一般性解决方法：
1.如果checking files system后有one of your disks to be checked for consistency.you may cancel the disk check,but it is storngly recommended that you continue.这句英文,在自检时按键盘上的enter键即可取消,没有这句话就得等待到扫描结束.
2.我们在Windows界面下,通过“磁盘碎片整理”程序来完成.首先打开开始菜单,运行,输入CMD,回车,在窗口中键入“chkdsk x:/f”(x为盘符)进行扫描;然后启动“磁盘碎片整理”对相应的磁盘进行碎片整理,可以消除再次的磁盘扫描.
3.我们知道系统之所以要对磁盘进行扫描是因为在注册表中设置了“脏”字节.在注册表中找到以下分支:
“Hkey_local_machine\System\CurrentControlSet\Control\Session Manager”在注册表右侧的窗口中找到
“BootExecute:REG_MULTI_SZ”键值就是windows关于磁盘扫描的,双击“BootExecute:REG_MULTI_SZ”将其改为:
“autocheck autochk *”即可恢复成正常的状态.
4.用windows优化大师休复硬盘中的逻辑错误.再用360杀毒修复电脑.
5.删除被扫描的磁盘并重新建个盘.
终极解决办法（以上方法不成功再用）
以上方法仅供参考,有时能解决问题,有时不能,下面有两个“杀手锏”百分之百能解决此问题,我试过了几十次了,都成功.
1.打开我的电脑,点文件,文件夹选项,点查看,把隐藏文件扩展名的√单击去掉,点确定,再打开系统自带的记事本,输入以下内容：
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager]
"BootExecute"=hex(7):00,00
注意：保存时类型选择“所有文件”,再命名为 取消自检.reg （扩展名一定要是reg）
再打开取消自检.reg,再打开的窗口中点是（Y）,导入注册表,重启后即可见效.
2.最万不得已的办法：
删除所有磁盘,重新分区,再重装系统.