英语翻译Measure a sample of 10 off ACME (2025PB422100) cores.Measure to MIL-STD 883 Method 2016.
来源:学生作业帮助网 编辑:六六作业网 时间:2024/11/26 01:10:08
英语翻译Measure a sample of 10 off ACME (2025PB422100) cores.Measure to MIL-STD 883 Method 2016.
英语翻译
Measure a sample of 10 off ACME (2025PB422100) cores.Measure to MIL-STD 883 Method 2016.
英语翻译Measure a sample of 10 off ACME (2025PB422100) cores.Measure to MIL-STD 883 Method 2016.
嗯,最好有上下文.
简单翻译如下:
从 ACME (2025PB422100) cores中抽测10个样品.参考标准MIL-STD 883的 方法2016 .
注:
MIL-STD 883 为美国军用标准.
以下仅供参考:
MIL-STD-883G METHOD 2016
15 November 1974 1 METHOD 2016
PHYSICAL DIMENSIONS
1.PURPOSE.The purpose of this examination is to verify that the external physical dimensions of the device are in accordance with the applicable acquisition document.
2.APPARATUS.Equipment used in this examination shall include micrometers,calipers,gauges,contour projectors,or other measuring equipment capable of determining the actual device dimensions specified in the applicable acquisition document.
3.PROCEDURE.Unless otherwise specified,the physical dimensions on the case outline drawing shall be measured.3.1 Failure criteria.Any device which exhibits a dimension or dimensions outside the specified tolerances or limits shall constitute a failure.
4.SUMMARY.The following detail shall be specified in the applicable acquisition document:
External dimensions which are capable of physically describing the device (see 3).Dimensions to be considered shall include case outline dimensions; special lead shapes (e.g.,required bend positions,angles of bend),where applicable; dimensions of any projecting or indented features used for coding of lead arrangement,automatic handling and similar purpose; and any other information which affects the installed size or orientation of the device in normal applications.
衡量一个示例10掉ACME(2025 pb422100)核。措施方法2016毫升std 883。
根据有道翻译,这难道是啥用药说明?
这么专业的,给下上下文才好。
从 ACME (2025PB422100) cores中抽测10个样品。检测方法2016,参标准
MIL-STD 883 .
10个样品测量了极致(2025pb422100)芯。对MIL-STD 883测量方法2016
测量10关闭ACME(2025PB422100)内核的一个样本。测量MIL-STD883方法2016。