ansys:poor element quality,怎么办那么如何能画出比较好的网格?就是说各边份数比如何控制的?

ansys:poor element quality,怎么办那么如何能画出比较好的网格?就是说各边份数比如何控制的? *x=Q->element[Q->front]; ANSYS 中 Nodal Solution与 Element Solution 有什么区别 ansys划分网格是出现的警告53 angles less than 2.5degrees found in triangle facets of volume 1,with smallest angle=0.83 degree.Poor element quality or mesh failure may result.A smaller element size specification may give better result.这个 之前ansys建了模型,然后导出element和node.因为ansys的模型没有保存下来,只剩下element和node了,请问怎么能由ansys读取element和node,重现原来的模型. ansys可以把mesh之后的element和node输出吗? ANSYS中element type reference number怎么设置的,有什么说法 ansys运行出现warning,Term on CE number 40 is not active on any element. ansys中Nodes I and J of element 10 ( COMBIN14 ) are not coincident.怎么解决 ansys求解中遇到the 3 nodes of element 28 are co-linear ANSYS 等值参数 (isoparametric) The ANSYS program's element library includes two basic types of area and volume elements:linear (with or without extra shapes),and quadratic.These basic element types are represented schematically in Figure 2.1.Let' ANSYS计算时,提示错误：ANSYS shell element 1201 references section 1 which is not a shell section.哪里错了 在ansys中Preprocessor/Element type/add/edit/delete后出现library of Element Types,library of Eleme在ansys中Preprocessor/Element type/add/edit/delete后出现library of Element Types,请问library of Elemen Types的中文翻译是什么? ansys中,已知节点坐标及该节点编号,怎么获得该点所属的element编号? ansys shell 181 分析时报错：Shell Element 1 does not have a valid section ID or real constants ansys静力分析求解出错：section ID set 1 undefined but referenced by element 1,这是哪错了? ansys分析中出现这个警告什么意思Real constant 1 referenced by at least element types 2 and 3. ansys中选用solid226单元,求解时出错,SOLID226 element 1 must have a nonzero KEYOPT(1) value.