关于pro/E 的,谁能帮我翻译一下,谢谢.boot up your pc with windows.start pro/e setup.open ptc_licfile.dat with your fav txt-editor.replace every occurance of 00-00-00-00-00-00 with the one shown in the bottom left corner of the Pro/e setup

关于pro/E 的,谁能帮我翻译一下,谢谢.boot up your pc with windows.start pro/e setup.open ptc_licfile.dat with your fav txt-editor.replace every occurance of 00-00-00-00-00-00 with the one shown in the bottom left corner of the Pro/e setup
关于pro/E 的,谁能帮我翻译一下,谢谢
.boot up your pc with windows
.start pro/e setup
.open ptc_licfile.dat with your fav txt-editor
.replace every occurance of 00-00-00-00-00-00 with the one shown in the bottom left corner of the Pro/e setup
(its your mac-id, format: xx-xx-xx-xx-xx)
.install pro/e - pro/m - pro/ds, i dont care which one or in which order
.on license-config screen select "nodelocked license" and point to edited ptc_licfile.dat
.blalala install
next for pro/engineer:
(if u didnt install the complete package, u get "missing file" errors, accept or bleed)
.run ptc.pro engineer.wildfire.5.0-patch.exe, point to \i486_nt\obj folder
.edit \bin\proev.bat
change "%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr%" in
"%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr% PTC_KEY=0"
(add PTC_KEY=0)

pro/mechanica:
.run ptc.pro mechanica.wildfire.5.0-patch.exe
.point to \i486_nt\bin
\i486_nt\obj
\i486_nt\ptc
(in this order, after every "missing file" error)
pro/distributed services:
.run ptc.distributed.services.5.0-patch.exe and point to \i486_nt\obj
我按你们两位老师说的做了,而且做了两遍,都不行,还有就是我的安装目录中没有proev.bat 文件 也没有\i486_nt\obj
这个地址!

关于pro/E 的,谁能帮我翻译一下,谢谢.boot up your pc with windows.start pro/e setup.open ptc_licfile.dat with your fav txt-editor.replace every occurance of 00-00-00-00-00-00 with the one shown in the bottom left corner of the Pro/e setup
太简单了~
.打开你的电脑(WINDOWS操作系统)
.开始PROE安装程序
.用文字编辑器打开ptc_licfile.dat
.替换每一处00-00-00-00-00-00 为你的网卡号(如xx-xx-xx-xx-xx)
.安装 pro/e - pro/m - pro/ds(此为PROE的3个模块),不用全部安装也可以
.当出现许可配置时,选择nodelocked license(锁定许可文件),选择你刚才编辑并保存的ptc_licfile.dat
.安装.
.这一步是针对pro/engineer模块
(如果你没有安装全部的子模块,你会得到"missing file" errors(找不到文件错误),确定即可
.将ptc.pro engineer.wildfire.5.0-patch.exe复制到\i486_nt\obj下面并运行
.编辑\bin\proev.bat 文件
修改这一行："%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr%"
在后面添加‘PTC_KEY=0’
改后的内容应为"%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr% PTC_KEY=0"
.pro/mechanica安装
将ptc.pro mechanica.wildfire.5.0-patch.exe复制到
\i486_nt\obj
\i486_nt\bin
\i486_nt\ptc
下面并运行
.pro/distributed services:
run ptc.distributed.services.5.0-patch.exe and point to \i486_nt\obj 这段意思同上,自己学习翻译下：)
学好英语对你的工程应用会大有好处哦