Finite Element Modeling Of Induction Heating On Easy-open-end Dies Easy-open-end怎么翻译

finite element analysis,it does finite element inverse approach是什么意思 finite element simulation modeling是什么意思 ANSYS:Both solid model and finite element model boundary conditions have been appliedto this model .As solid loads are transferred to the nodes or element ,they can overwrite directly applied loads. 英语翻译A finite element model is proposed to simulate the precision and ultraprecision grinding of steel and to describe the temperature fields developed during the process.The grinding is modelled using the commercial implicit finite element co a vanishing finite element technique是什么意思? 英语翻译MODEL DESCRIPTIONThe solid finite element model of the knuckle has been built using a second order solid tetrahedron element.The model has 27,832elementand 47,291 nodes.The loads are applied at the upper,lower and tierod ball joints.The l 英语翻译4.Conclusions 1.A two-dimensional thermo-mechanical finite element model was developed,and applied to thecladding of C95600 on AA333.Since the film has a lower coefficient of thermal expansion thanthe substrate,the latter was found to be 英语翻译3.1 Finite Element Modeling and Stress Analysis.In orderto obtain the accurate damage model,thermal cycling test datafrom different combinations of component types and thermal pro-files are needed.Besides thermal cycling test data from th 有限差分法（Finite Difference）、有限体积法（Finite Volume）、有限元法（Finite element）怎样辨析 ANSYS结果出现错误Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly applied loads.这是错误文件的说明,加载 ansys 发出warning,这个对结果有没有很大的影响?Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly applied load 英语翻译2.Thermal Modelling of GrindingThe finite element model proposed is based on Jaeger's model [2]; it is a 2D model and the grinding wheel is considered to be a moving heat source,see Fig.1.The heat source is characterised by a physical qua ansys 加载时出现提示信息,我在加载节点面荷载时,“Both solid model and finite element model boundary conditions have been applied to this model.As solid loads are transferred to the nodes or elements,they can overwrite directly appl double quarter point finite element中文什么意思displacement correlation technique 中文是什么意思谢谢 implement real-time calculation of complicated structure with finite element method加倍感激不尽! Finite Element Modeling Of Induction Heating On Easy-open-end Dies Easy-open-end怎么翻译 ansys在做静力学分析时,强制退出是怎么回事?我在ansys中几何建模,然后定义材料、划分网格都没问题,定义约束也没问题,但等我施加完载荷时,跳出来一个警告框：“Both solid model and finite element