英译中:请译下面一段话(不要机译)Acc. to DIN 6700 - 5, weld quality class2, admissible undercuts as well as misalignment of edges on the surface must not be removed by grinding of the weld area but must be closed by means of filler. Under
来源:学生作业帮助网 编辑:六六作业网 时间:2024/12/23 17:15:50
英译中:请译下面一段话(不要机译)Acc. to DIN 6700 - 5, weld quality class2, admissible undercuts as well as misalignment of edges on the surface must not be removed by grinding of the weld area but must be closed by means of filler. Under
英译中:请译下面一段话(不要机译)
Acc. to DIN 6700 - 5, weld quality class2, admissible undercuts as well as misalignment of edges on the surface must not be removed by grinding of the weld area
but must be closed by means of filler. Undercuts and misalignment of edges exceeding the above limits must be reworked and rewelded.
英译中:请译下面一段话(不要机译)Acc. to DIN 6700 - 5, weld quality class2, admissible undercuts as well as misalignment of edges on the surface must not be removed by grinding of the weld area but must be closed by means of filler. Under
按照6700-5,2级焊接标准,可允许的焊接咬边以及表面边缘不齐,不能以在焊接区域打磨的方式消除,而必须通过填充方式.焊接咬边和边缘不齐超过允许范围就必须返工和重新焊接.
英语专业,质量保证