英语翻译装卸机器时的注意事项 机器的装卸始终存在潜在的危险,应该极为小心.机器装卸时,发动机要低速运转,机器要低速行走. 机器装卸要在坚固的平地上进行.与路边保持安全

英语翻译装卸机器时的注意事项 机器的装卸始终存在潜在的危险,应该极为小心.机器装卸时,发动机要低速运转,机器要低速行走. 机器装卸要在坚固的平地上进行.与路边保持安全
英语翻译
装卸机器时的注意事项
 机器的装卸始终存在潜在的危险,应该极为小心.机器装卸时,发动机要低速运转,机器要低速行走.
 机器装卸要在坚固的平地上进行.与路边保持安全距离.
 机器装卸要始终将运输车的车轮固定好.
 要使用专用装卸平台,或具有足够强度的专用支架.要保证支架有足够的宽度和长度,以提供一安全装卸的斜坡,斜坡与地面之间的夹角不能超过15º.斜坡之间的距离要与机器的轮距相适应.
 确保专用支架牢固定位,两边高度一致.
 确保专用支架斜坡表面清洁,无润滑剂、油渍、冰和松散的材料.将机器轮胎上的污物清除掉.
 绝不可在斜坡上转向.如有必要,机器应驶离斜坡,调整好方向之后再次开上去.
 装车运输时,应在装车后,将机器轮胎楔住,把机器用钢丝绳扎紧.

英语翻译装卸机器时的注意事项 机器的装卸始终存在潜在的危险,应该极为小心.机器装卸时,发动机要低速运转,机器要低速行走. 机器装卸要在坚固的平地上进行.与路边保持安全
Handling machinery at the Attention
 machines handling the potential danger always exists,it should be very careful.Loading and unloading machines,engines to low-speed operation,low-speed machines to run.
 machines working in the firm on the ground.And maintain a safe distance from the roadside.
 handling machines should always be properly fixed the wheel transporter.
 To use the platform for loading and unloading,or have sufficient strength for the stent.To ensure there is sufficient support the width and length,to provide a safe working slope,slope and the angle between the ground can not exceed 15 º.The distance between the slopes with a machine Lunju suit.
 ensure solid support for positioning,a high degree of consensus on both sides.
 ensure that the special stent surface cleaning,no lubricants,Youzi,ice and loose material.Machinery tires on the dirt removed.
 can not shift on the slopes.If necessary,pull off the slopes machines,adjusting the right direction again after a boost.
 loading of transport,should be loading,the machine will tire wedge to live,the machines used wire rope Zhajin.